MAINTENANCE
(11) Cleaning of the Pre-Image Transfer Guide Plate
(12) Replacement of the ATDC Sensor
1. Separate the IU into the Drum Assy and Developing Assy.
☞ 1-15
2. Remove the Developer Scattering Prevention Plate.
3. Dump developer.
<<How to Dump Developer>>
• Dump developer on the surface of the Sleeve
Roller by turning the gear in the direction of the
arrow with the Developing Unit tilted as shown.
NOTE
• Turning the gear backward at this time could dam-
age the Mylar for cleaning the ATDC Sensor.
4035D038AA
• Dump developer until almost no developer sticks to
the Sleeve Roller.
2. Pour one packet of developer.
NOTES
• Shake the packet of developer well before pouring.
• When the developer has been changed, make the
ATDC AUTO ADJUST and enter the adjustment
value on the Adjust Label.
☞ 2-46
4035D039AA
1. Using a soft cloth dampened with alcohol, wipe
the Pre-image Transfer Upper Guide Plate clean
of dirt.
4035D040AB
1-20
Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004