ADJUSTING/SETTING
(7)
PAPER SIZE COUNTER
To clear each of the counts of the Paper Size Counter.
(8)
MISFEED COUNTER
To clear each of the counts of the Misfeed Counter.
(9)
TROUBLE COUNTER
To clear each of the counts of the Trouble Counter.
(10) ADF BACKUP CLEAR (Di2011 Only)
Purpose
To clear the values adjusted with ADF SEN-
SOR ADJUST and the values adjusted with
Org. Width Detect.
✽ When PBA-CONT board has been
replaced.
✽
When PBA-VR board has been replaced.
4.3.10
SECURITY
• SECURITY is used to set the security functions.
<Security Function Setting Procedure>
1. Call the Service mode to the screen.
2. Press the following keys in this order:
Stop → 9
3. The Security mode screen will appear.
(1)
TOTAL COUNTER COUNT
Purpose
To set the count-up method.
Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
Purpose
Purpose
Purpose
Setting Details/Precautions
✽
Refer to the option service manual (AFR-19) for
details.
Setting Details/Precautions
• The default setting is "0."
0: One count-up for each copy cycle (ordi-
nary mode)
1: Multiple count-up according to the
paper size and copy mode.
2: Multiple count-up according to the
paper size and copy mode.
2-53