Konica Minolta Di1611 Service Manual page 148

ADJUSTING/SETTING Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
9. Loosen two screws on the Manual Bypass and
adjust the position of the Manual Bypass.
Adjustment Instructions
If width A on the copy is smaller than width A on the
test pattern, move the Manual Bypass toward the
rear of the copier.
4532U029AA
If width A on the copy is greater than width A on the
test pattern, move the Manual Bypass toward the
front of the copier.
10. Make another copy of the test pattern and check
for any error in width A.
2-61