Disassembly Of The Fusing Unit - Konica Minolta Di1611 Service Manual

MAINTENANCE
(5)

Disassembly of the Fusing Unit

<Removal of the Thermistor and Paper Separator Fingers>
1. Remove the Fusing Unit.
☞ 1-24
3. Remove two cable holders of the flat cable.
4035D067AA
4. Remove the harness from one wiring saddle.
4035D068AA
5. Remove three screws (with springs) and the PH
Unit.
4035D069AA
2. Remove the pressure springs on both ends of the
unit.
4035D070AA
1-36
Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004