Konica Minolta Di1611 Service Manual page 67

Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
Side B
Side A
3. Wind the cable on side A around wire pulley 2
four turns clockwise, starting with the slit at the
top in the front left of the pulley.
4035D112AA
4. Affix tape to secure the cable to wire pulley 2.
4035D113AA
5. Pass the cable (silver) through wire pulley 1.
4035D114AA
6. Wind the cable on side A around wire pulley 1
four turns counterclockwise, starting with the slit
at the bottom in the front left of the pulley.
4035D115AA
7. Wind the cable on side B around wire pulley 1
four turns clockwise, starting with the slit at the
top in the rear left of the pulley.
4035D116AA
1-47
MAINTENANCE