Electrical Data - Nordson AltaBlue Customer Product Manual

10-2
Technical Data

Electrical Data

Available operating
voltages
Maximum melter
power requirements
Max. load per hose
receptacle (2 chan-
nels), two/four/six/
eight hose/applicator
melters
Part 1120130
WARNING! The unit is designed for only one operating voltage. Operate
only at the operating voltage shown on the ID plate.
400 V 3‐phase with neutral (star — WYE)
AC
One/two-pump melter Two hose/applicator
Two-pump melter
Three/four-pump
melter
1000 W, any single hose or applicator
1200 W, any hose/applicator pair
2000 W, sum of hose/applicator pairs 1 and 2
2000 W, sum of hose/applicator pairs 5 and 6
2000 W, any single hose, or applicator 3 or 4
2000 W, any single hose, or applicator 7 or 8
2000 W, hose/applicator pair 3 or 4
2000 W, hose/applicator pair 7 or 8
4000 W, sum of hose/applicator pairs 3 and 4
4000 W, sum of hose/applicator pairs 7 and 8
NOTE: Total external wattage must not exceed 12,000 W.
Four hose/applicator
Six hose/applicator
Eight hose/applicator
Four hose/applicator
Six hose/applicator
Eight hose/applicator
15L:8380W
30L:9482W
50L:12420W
15L:12053W
30L:13155W
50L:16094W
15L:13890W
30L:14992W
50L:17931W
30L:23166W
50L:25232W
30L:18684W
50L:20750W
30L:20521W
50L:22587W
30L:24194W
50L:26161W
E 2011 Nordson Corporation