Introduction; Intended Use; Electromagnetic Compatibility (Emc) - Nordson AltaBlue Customer Product Manual

Intended Use

Electromagnetic Compatibility (EMC)

E 2011 Nordson Corporation
AltaBlue™ adhesive melters may be used only to melt and convey suitable
materials, e.g. thermoplastic hot melt adhesives.
Any other use is considered to be unintended. Nordson will not be liable for
personal injury or property damage resulting from unintended use.
Intended use includes the observance of Nordson safety instructions.
Nordson recommends obtaining detailed information on the materials to be
used.
In regard to electromagnetic compatibility (EMC), the melter is intended for
use in industrial applications.
When operated in residential or commercial areas, the melter may cause
interference in other electrical units, e.g. radios.

Introduction

Section 2
Introduction
Part 1120130
2-1