4-2
About the Touch Screen Display and User Interface
Navigating the Touch Screen Displays
About the Main Display
View melter
status
*View color coded zone
and pump status
*Master On/Off controls
*Enable/disable
individual zones
and pumps
*Modify zone and
pump settings
Part 1120130
The AltaBlue Touch Series Melter consists of the following displays:
S
One Main display
S
Four Primary displays:
a. Monitor
b. Operator
c. Settings
d. System
The following sections explore each display in greater detail.
Use the Main Display as the central location where you can access the
following displays:
Figure 4‐1
The Main Display
Accessing the Main Display
The Main Display appears when you Touch
left corner of any primary display.
Configure and modify
temperature
and pump settings
Configure and modify
system
and melter settings
located in the upper
E 2011 Nordson Corporation