Changing The Material Type; Detaching The Exterior Panels; Fan And Air Filter - Nordson AltaBlue Customer Product Manual

Changing the Material Type

Detaching the Exterior Panels

Fan and Air Filter

E 2011 Nordson Corporation
1. Run the melter until empty.
2. Determine whether the new material may be mixed with the old material.
S
May be mixed: Remaining old material can be flushed out using the
new material.
S
May not be mixed: Thoroughly purge the unit with a cleaning agent
recommended by the material supplier.
NOTE: Properly dispose of the old material according to local regulations.
Open the protective panels with a 4 mm Allen key.
The air filters must be cleaned (knocked out) or replaced, depending on dust
accumulation.
Refer to Section 9, Parts, for the filter part number.
Service
On the inside
Part 1120130
7-5