Module - Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series
LAN Settings
IP Configuration: Configure the following settings if Static IP is selected. If DHCP is selected, the
following settings are not allowed (option: Static IP or DHCP).
IP Address: Set the IP address of the device (0 to 255).
Netmask: Define the logical subdivision of an IP network and specify the network's available hosts (0 to
255).
Gateway: Define the router that can route the network traffic to the other network or Internet (0 to 255).
DNS1 and DNS2: Define DNS server(s) that can translate URL to IP address (0 to 255).
INFORMATION
The IP address of the device must be unique. Two devices in the network cannot share the same IP
address as it causes an IP address conflict.

Module

This section introduces the Module settings function.
4-14
Software Tools