How To Use Mqtt To Connect To The Iothinx 4510 Series; Broker Settings On The Computer; Set Up Mqtt On The Iothinx 4510 - Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series
4. Click Send. The DO-00 channel should respond by turning the light on.
How to Use MQTT to Connect to the ioThinx
4510 Series

Broker Settings on the Computer

Introduction to Mosquitto
For information about Eclipse Mosquitto, please refer to the following web page: https://mosquitto.org/.
Mosquitto can be used to implement versions 5.0, 3.1.1, and 3.1 of the MQTT protocol.
Host
IP address: 192.168.127.200
Run Mosquitto Broker from Task Manager
Type Ctrl + Alt + Delete to open Task Manager, click the mosquito row to select it, and then right click
in the status column and select Start.

Set Up MQTT on the ioThinx 4510

Enable MQTT Client Service
1. Log in to the ioThinx 4510:
Step 1: Open your web browser and type the default IP address of the device: 192.168.127.254.
Step 2: On the login page, type the default username/password (admin/moxa) to log in to the Web
Console.
6-11
Moxa ioThinx 4510
IP address: 192.168.127.254
Tutorials