Page 2
Moxa Tech Note Connecting the ioLogik 2000 to a SolarWinds NPM There are two sections in this document. The first section introduces how to connect the ioLogik 2000 to the SolarWinds NPM via the SNMP protocol, and second section introduces how to set up the SolarWinds NPM to receive SNMP traps from the ioLogik 2000 series.
Page 6
Moxa Tech Note Connecting the ioLogik 2000 to a SolarWinds NPM E. After you complete the configuration, return to the Click&Go Logic tab and click on Upload to ioLogik; the rules will take effect after the system has been restarted. Note: After logging back in as administrator and returning to the Click&Go Logic tab, click Retrieve to view the current ruleset.
Page 7
A. Open IOxpress and then click Device Configuration Add Configuration… on the menu bar. Next, choose your device from the list of ioLogik 2500 series devices. B. Click Settings Click&Go Plus SNMP Trap on the menu bar, and then type in the Name, Server IP Address, Trap Community and messages, then click Add.
Page 8
Moxa Tech Note Connecting the ioLogik 2000 to a SolarWinds NPM C. Click the Click&Go Plus tab to configure an IF-THEN-ELSE logic routine: Click on “Condition” to set the IF condition, and then click on “Action” for the THEN and/or ELSE condition. D.
Page 9
Type in your username and password, and then click Submit. Note: You can also update the configuration from a configuration file saved on your computer. To learn more about the ioLogik 2500 series and IOxpress, refer to the user’s manual for details: http://www.moxa.com/support/DownloadFile.aspx?type=support&id=7916 For Click&Go Plus, refer to the following link:...