Hardware And Software Requirements; Safety Precautions - Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series

Hardware and Software Requirements

You will need the following hardware and software to use the ioThinx 4510 Series.
• A power source that provides 12 to 48 VDC, and power wires
• A PC running a Windows OS with Chrome installed and an Ethernet cable
• 45MR modules, if available
• IOxpress software utility (optional)
• Moxa CLI Configuration Tool (optional)

Safety Precautions

Please observe the following safety precautions when installing and using the ioThinx 4510 Series:
DANGER
Never work on the device while the power source is switched on. Disconnect all power sources to the device
before performing installation, repair, or maintenance work.
DANGER
Disconnect the power when you want to remove or replace components, or disconnect equipment unless the
area is known to be free of ignitable substances.
• If you connect or disconnect the Removable Terminal Block when field power is applied, an electrical arc
can occur. This could cause an explosion when installed in hazardous locations. Ensure that power is
removed or the area is nonhazardous before installation.
• If you connect or disconnect wiring while the power is on, an electrical arc can occur. This could cause
an explosion in hazardous environments. Ensure that power is removed or the area is nonhazardous
before installation.
• Do not disconnect the unit unless the power has been disconnected or the area is known to be
nonhazardous. In a hazardous area, the unit must be powered down before removing it.
1-3
Preface