Table of Contents
Advertisement
15.2. TOUCHSCREEN INSTALLATION AND CONNECTION
The touch screen is used to operate the system. It must be installed on the support provided at the back of the
add-on, on the same side as the link board housing.
Connect link board with the touch screen using the telecommunication wire provided with the user manual. Plug
the telecommunication wire in connector labeled LCD and pull it out of the board housing through the top
grommet. Simply run the wire on the side of the add-on using the plastic ties supplied with the user manual.
Replace the access panel of the link board. Note that the touch screen is removable if access is restricted.
25
Advertisement
Table of Contents
