Glass Characteristics; Ash Drawer; Ash Grate; Flue And Barometric Draft Control Connection - PSG Caddy PF01010 Installation And Operating Instructions Manual

Table of Contents

Advertisement

2.7 GLASS CHARACTERISTICS

The glass is made of 3/16" (5 mm) thick ceramic glass.
Do not operate your wood furnace with a broken glass, as this could seriously
damage your furnace. You can purchase a replacement glass from your PSG
dealer.

2.8 ASH DRAWER

Your furnace is equipped with an ash drawer to collect ashes produced by the
combustion of wood. This drawer must not be left open during combustion as
this may cause over firing and serious damages to the furnace. The drawer
must be emptied regularly.
IT IS IMPORTANT THAT THE DOOR AND THE ASH DRAWER BE KEPT
CLOSED WHILE THE APPLIANCE IS IN USE. MAINTAIN ALL GASKETS IN
GOOD CONDITION; IN CASE OF DETERIORATION, CONTACT YOUR
DEALER FOR A GENUINE REPLACEMENT GASKET.

2.9 ASH GRATE

You must replace the ash grate if it is damaged and a replacement may be
obtained from your dealer. The steel cover on the ash grate is meant to optimize
the temperature inside the combustion chamber and should only be removed to
empty the ashes.

2.10 FLUE AND BAROMETRIC DRAFT CONTROL CONNECTION

BEFORE CONNECTING THE STOVE PIPE, MAKE SURE YOU HAVE
REMOVED THE SCRAPER FROM THE FLUE PIPE.
For a proper installation, follow the advice below:
1- All the exhaust pipe joints must be secured with three screws.
Make sure that each screw goes through the inner wall of both connectors
(male and female). See pictures below showing a male-female coupling.
WARNING
WARNING
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents