Pipe Connector And Damper; Electrical Connections; Servomotor Installation; Operating Instructions - PSG CADDY MAX CADDY WOOD ADD-ON PF01102 Installation And Operating Instructions Manual

Table of Contents

12.4. PIPE CONNECTOR AND DAMPER

The Max Caddy Add-on must be connected to a duct system and chimney that are in good condition and suitable for

wood burning. the use of a 6" connecting pipe and chimney is recommended. It is strictly forbidden to connect a

solid fuel burning appliance to a chimney already connected to a propane or natural gas appliance. Regulation

CAN/CSA B365.1

See Section 15.11 - ELECTRICAL CONNECTIONS

See Section 14.5 SERVOMOTOR INSTALLATION AND CONNECTION

Operate the existing furnace periodically to ensure that it will operate satisfactorily when needed.

On the wood add-on, the thermostat controls the air inlet damper. When the thermostat calls for heat, the damper

opens and the combustion is stirred up. When the add-on gets hot enough, the RTD probe activates the blower motor

of the existing furnace at the speed selected for wood heating.

When there is no call for heat, the air inlet damper must be completely closed and the chain must be affixed to the

damper motor at the "8 o'clock" position.

THERMOSTAT INSTALLATION

Table of Contents