Touchscreen Installation And Connection - PSG MAX CADDY PF01102 Installation And Operating Instructions Manual

9.3. TOUCHSCREEN INSTALLATION AND CONNECTION

The touch screen is used to operate the system. It must be installed on the support provided at the back of the furnace,
on the same side as the link board housing.
Connect link board with the touch screen using the telecommunication wire provided with the user manual. Plug the
telecommunication wire in connector labeled LCD and pull it out of the board housing through the top grommet. Simply
run the wire on the side of the furnace using the plastic ties supplied with the user manual. Replace the access panel
of the link board. Note that the touch screen is removable if access is restricted.
18