JUKI LH-4500C Series Instruction Manual page 23

Switch/display

Customization button 1

Customization buttons 2 - 7

Customization buttons 2 - 11

Second sewing screen button
* Confirmation of data
To change the pattern number, select the pattern you want to use first.
Then, confirm your selection by pressing
For the setting items of the Memory switch or sewing pattern, change the target data and press
to confirm the change.
After the setting data on the number of stitches of reverse-feed stitching or the number of stitches of
multi-layer stitching has been changed, the changed setting data is confirmed by pressing
<Sewing screen>
<Second sewing screen>
A selected function can be allocated to and registered with this
button. Initially, the sewing counter has been factory-allocate and
-registered.
A selected function can be allocated to and registered with this but-
ton.
A selected function can be allocated to and registered with this but-
ton.
The second sewing screen is displayed.
.
When
screen, the "second sewing screen" is dis-
played.
On the "Second sewing screen", the cor-
ner stitching function is set. Refer to
1. Corner stitching function" p.89
details. (This function is only available on
the sewing machine provided with the sepa-
❶
rately-driven needle bar changeover mech-
anism.)
Enter settings as desired on this screen.
Then, return the screen to the sewing
screen by pressing
❷
– 18 –
Description
❶ is pressed on the sewing
❷ .
.
"6-
for