JUKI LH-4500C Series Instruction Manual page 99



Tension correction
amount [%]
U202
100
0
100
U201

 ❾
0
Bobbin
thread
remaining
amount [%]
– 94 –
5) Set "U201 Bobbin thread remaining
amount for starting correction" with nu-
meric keypad  .
Using the aforementioned set value, de-
termine the remaining amount of bobbin
thread indicated on the bobbin counter
for starting the needle thread correction.
"5-3. Counter function"
Refer to
p.71 for how to set the bobbin count-
er.
The set value can be reset to the initial
value of 0 by pressing
6) Set "U202 Final correction amount" with
numeric keypad  .
Using the aforementioned set value,
determine the correction ratio of the
needle thread tension.
The set value can be reset to the initial
value of 100 by pressing
❾ is pressed, the entered
7) When
value is confirmed and the screen is
returned to the "S079 Needle thread
tension correction screen".
* Refer to the figure on the left for the re-
lation between "U201 Bobbin thread re-
maining amount for starting correction"
and "U202 Final correction amount".
 .
 .