JUKI LH-4500C Series Instruction Manual page 53

・ Inputting the correction value for reverse-feed stitch length (B)
<Reverse-feed stitch length correction value input screen>
・ Inputting the presser foot pressure (C)
<Presser foot pressure input screen>
・ Inputting the sewing speed (D)
<Sewing speed input screen>
 

 
 
1) When
verse-feed stitch length correction
value input screen is displayed.
2) Input a correction value with numeric
keypad  .
3) When
you have input is confirmed and the
screen returns to the "sewing-start re-
verse feed stitching data edit screen".
1) Press
pressure input screen is displayed.
2) Input a presser foot pressure with but-
ton  .
In the case  is selected, the pressure
*
foot pressure you input will be the pres-
sure which is employed for the normal
feed stitching section.
3) When
you have input is confirmed and the
screen returns to the "sewing-start re-
verse feed stitching data edit screen".
1) When
ing speed input screen is displayed.
2) Input a sewing speed with numeric key-
pad  .
3) When
you have input is confirmed and the
screen returns to the "sewing-start re-
verse feed stitching data edit screen".
– 48 –
B is pressed, the re-
 is pressed, the value
C. Then, the presser foot
 is pressed, the value
D is pressed, the sew-
 is pressed, the value