JUKI LH-4500C Series Instruction Manual page 161

② Selecting the new condensation custom creating function
❷
<Condensation custom pattern list screen>
③ Inputting the condensation custom number
❸
<New condensation custom pattern creation pattern number
input screen>
④ Creating a condensation custom
A B
❻
Stitch length
Number of stitches
<Condensation custom edit screen>
❹ ❺
❼
❻
– 156 –
1) Registered condensation custom pat-
terns are displayed on the screen.
❷ .
Press
The "new condensation custom pattern
creation pattern number input screen"
is displayed.
1) Enter the pattern number with numeric
keypad ❸ .
An unassigned registration number
that is closest to the entered value in
the plus/minus direction is displayed by
pressing
❺ .
2) Press
The "condensation custom edit screen"
is displayed.
In the case the entered number has
already been registered, the prompt
message for overwrite confirmation is
displayed.
Press ❻ to put the step you have
1)
pressed in the selected state.
2) The selected condensation custom
number is displayed in A and the step
number which is being edited, and the
total number of steps are displayed in
B.
3) The "number of stitches" and "stitch
length" for the step are displayed in ❻ .
Press ❻ to put the displayed data in
the selected state.
Previous step number screen or the
next step number screen is displayed
❼ .
with
4) "Condensation custom data input
screen" is displayed by pressing ❻
while the step is being selected.
❹ .