Page 1
2-needle, Needle-feed/Bottom-feed, Lockstitch Machine For Foundation LH-3126F The LH-3126F is the most optimally suited model for sewing brassieres. With its various capabilities such as topstitching and tape-attachment on the peripheries of bra cups, the machine flexibly responds to a wider range of sewing requirements for sewing brassieres.
Page 2
Select the type that fits your purpose. the hook with a non-rotational bobbin, the bobbin is secured in (The latch hook is exclusively designed for the LH-3126F. the bobbin case and does not rotate as the bobbin thread feeds. However, the conventional bobbin can be used with the latch This prevents variations in thread tension caused by changes in hook.)
Page 3
(Not provided) Compatible with SC-800 and EC-10B Where "1" is selected (with built-in synchronizer and Where "0" is selected resistor pack) (Provided) Where "1" is selected Refer to the combination availability table. To order, please contact your nearest JUKI distributor.
Page 4
3430 4909 4914 INTERNATIONAL SALES H.Q. http://www.juki.com Specifications and appearance are subject to change without prior notice for improvement. Read the instruction manual before putting the machine into service to ensure safety. This catalog is printed on recycle paper. FEBRUARY, 2004 Printed in Japan(AD)
Need help?
Do you have a question about the LH-3126F and is the answer not in the manual?
Questions and answers