JUKI LH-4500C Series Instruction Manual page 126

❻
<Multi-layered portion sewing parameter list screen>
2. Set a "threshold" for the multi-layered section detection.
❻ .
1) Press
"Multi-layered section changeover function ON sensor value screen" is displayed.
(For the "threshold" for turning OFF the multi-layered section changeover function, press
❺ and set the threshold in the same manner as described below.)
<Multi-layered section changeover function ON
sensor value screen>
Place the normal section of material under the presser foot, and press ❽ .
3)
Lift the presser foot by depressing the back part of pedal.
❽
<Multi-layered section changeover function ON
sensor value teaching screen>
❹ ❸
❺
❼
– 121 –
4) Select enable/disable of the multi-lay-
ered part detection by pressing
❸ .
❹ to confirm the setting. Then, the
5)
sewing data edit screen is displayed.
Set the "threshold" for ON/OFF of the
multi-layered section detection.
* For the purpose of the multi-layered
section detection function, the word
"threshold" means the value at which
the multi-layered section sensor reacts.
MAX : 3000
MIN : 1000
❼ .
2) Press
"Multi-layered section changeover func-
tion ON sensor value teaching screen"
is displayed.