② Performing the corner stitching
A sewing pattern is indicated in the example in the aforementioned figure.
70°
A
B
F
C
G
E
D
A 2-needle sewing
B After the sewing machine has stopped, move
separately-driven needle bar changeover
lever H to the L position.
C Carry out sewing with the single needle,
right, under sewing condition .
D The presser foot automatically goes up after
the sewing machine has finished sewing of
the number of stitches set with
E Turn the material (by 70 °).
H
F Carry out sewing with the single needle,
right, under sewing condition .
G The separately-driven needle bar function is
reset after the sewing machine has finished
sewing of the number of stitches set with
H 2-needle sewing
– 92 –
↓
↓
↓
↓
↓
↓
↓