Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
LH-4100 series
LH-4128 / LH-4128-7 / LH-4168-7 / LH-4188-7
Semi-dry-head, Direct-drive, High-speed,
2-needle, Needle-feed, Lockstitch Machine
Advertisement
Related Manuals for JUKI LH-4128
Summary of Contents for JUKI LH-4128
- Page 1 LH-4100 series LH-4128 / LH-4128-7 / LH-4168-7 / LH-4188-7 Semi-dry-head, Direct-drive, High-speed, 2-needle, Needle-feed, Lockstitch Machine...
- Page 2 LH-4100 series Even when the sewing material is changed or even if the sewing process is difficult, the machine will adapt itself to the circumstance and enables easy sewing. By the adjusting thread tension at a multi-layered part of the material or to the material thickness, the machine is adaptable to a broader range of sewing materials.
- Page 3 To changeover between the needle feed and bottom feed, the replacement of gauges and a simple adjustment are required. JUKI's feed method permits adjustments of the timing between the needle and feed dog, which affects the sewing performance of the machine.
- Page 4 & long arm to help eliminate operator stress, thereby increasing productivity. 127mm 267mm The machine has the largest distance from needle to machine arm among any other similar models regardless of manufacturer, i.e., JUKI and its competitors. New model of wire-type needle clamp The machine comes with a newly developed needle clamp to increase the stability of needle-thread loops and to reduce untwining of the thread.
- Page 5 Separately driven needle bars which provide outstanding durability and holding power (LH-4168-7, LH-4188-7) The machine is installed with JUKI's newly developed unique separately driven needle bars. When one of the needle bars is stopped, it is held in place with...
-
Page 6: Specifications
Trouble and time required to change the gauge is reduced to half or less (applies to all classes of machines) JUKI's dry technology has achieved the adoption of a dry frame in all classes of machines, including those with Replacement and adjustment of the gauge is necessary in... - Page 7 IP-110B For the operation panel “IP-110B” , machine type CP-180A “LH-4168-7” and “LH-4188-7” can be selected. For the operation panel “CP-18A” or “CP-180A” , machine type “LH-4128” and “LH-4128-7” can be selected. To order, please contact your nearest JUKI distributor.
- Page 8 FAX : ( ) 42-357-2274 SEWING MACHINERY BUSINESS UNIT http://www.juki.com ✽ Specifications and appearance are subject to change without prior notice for improvement. ✽ Read the instruction manual before putting the machine into service to ensure safety. ✽ This catalogue prints with environment-friendly soyink on recycle paper.