JUKI LH-4500C Series Instruction Manual page 69

(2) How to set (polygonal-shape stitching)
<Number of stitches input screen>
❸
❷
– 64 –
① Turning ON the teaching function
❷ to turn ON the teaching
Press
function.
② Starting teaching
The input value is set to 0 (zero). Carry
out sewing until the needle entry posi-
tion at which you want to finish sewing
by depressing the pedal. Then, count
the number of stitches sewn using the
teaching function.
③ Confirming the teaching content
Confirm the content of teaching by car-
rying out thread trimming.
The screen returns to the "Sewing
screen (polygonal shape stitching)
(Maintenance personnel mode)".
"9-2-1. Editing a polygonal-
* Refer to
shape stitching pattern" p.133
how to carry out teaching continuously
while advancing the steps.
for