JUKI LH-4500C Series Instruction Manual page 66

(2) Setting items for the polygonal-shape stitching steps
Data No. Item name
Step 01
S201 Step changeover
S203 Sensor value to change over the
step
S204 Number of stitches
(seam length in mm)
S205 Stitch length
(the number of stitches per inch,
the number of stitches per 3 cm)
S206 Needle thread tension (left)
S207 Needle thread tension (right)
S209 Presser foot pressure
S211 Needle bar stop position at the
time of pause
S212 Presser foot lifting during interme-
diate stop
S213 Presser foot lifting during interme-
diate stop
S214 Needle bar stop position at the
time of stop
S215 Stop and presser foot lifting
Unit of
change
Number of
stitches
1
―
1stitch
1 to 2000
0.1mm
-4.0 to 4.0(LH-4578C-0B)
-7.0 to 7.0(LH-4578C-7, LH-4588C-7)
0 to 200
0 to 200
-20 to 200
: Stop with the needle up
: Stop with the needle down
: OFF
0.1mm
0.0 to 20.0
: Stop with the needle up
: Stop with the needle down
: Thread trimming
: Continuity
: OFF
– 61 –
Input range
One-touch Multi-layered
switch part
―
1000 to 3000
― ―
: ON
: ON
Separate-
ly-driven nee-
dle bar sensor
―
1 to 2000