JUKI LH-4500C Series Instruction Manual page 141

Stop - Presser foot
lifting
Stop - Presser foot
lifting height
One shot
Sewing speed limit
Automatic return to
both-needle operation
mode in the case of
step feed
<Sewing adjustment mode screen>
A
<Teaching input screen (in the case the step changeover ba-
sis is the number of stitches or the separately-driven needle
bar changeover)>
Step changeover reference
Number of stitch-
Hand switch
es
○
○
○
○
○
6)
7)
– 136 –
Multi-layered part
detection
○ ○
○ ○
○ ○
○ ○
○ ○
 is pressed, the "sew-
When
ing adjustment mode screen" is dis-
played.
To set the sewing data under the
sewing adjustment mode, Refer
2-5. Editing the sewing patterns (2)
Sewing adjustment mode" p.53
❾ is pressed, the "teach-
When
ing input screen" is displayed.
In the case the step changeover basis
is the number of stitches or the sepa-
rately-driven needle bar changeover,
the input value A of the number of
stitches becomes 0 (zero).
Depress the pedal to run the sewing
machine. Count the number of stitches
the sewing machine produces until it
stops.
Separately-driven
needle bar sensor
○
○
○
○
○
to"5-
.