JUKI LH-4500C Series Instruction Manual page 128

❶ ❺
<Multi-layered portion sewing parameter list screen>
❷
❸
<Multi-layered portion run-on setting list screen>
3. Setting the sewing parameters to be
used when a multi-layered portion of
material is detected
1)
2)
❹
3)
4)
3)
*
– 123 –
❶ .
Press
The "Multi-layered portion run-on set-
ting list screen" is displayed.
Setting the sewing parameters to be
used when the sewing machine running
on a multi-layered portion of material.
: Stitch length
: Presser foot pressure
: Needle thread tension (left)
: Needle thread tension (right)
: Number of stitches to be sewn
before running on the multi-lay-
ered portion of material
Stitch length can be input by pressing
❷ .
Enter the stitch length with
Similarly, input the presser foot pres-
sure, needle thread tension (left) and
needle thread tension (right).
❹ , the values
When you press
you have entered are confirmed and
the screen returns to the "Multi-layered
portion sewing parameter list screen".
Refer to "8-12-2. Setting the multi-
layered portion changeover timing
according to the number of stitches"
p.125 for the number of stitches to be
sewn before running on the multi-lay-
ered portion of material.
❸ .