6)
Set correction value [%] of each sewing speed by pressing
creased / decreased with
7)
The result of the aforementioned setting procedure can be confirmed on presser foot pressure
chart .
Set values through can be reset to the initial value of 100 by pressing
8)
9)
When you press
matic presser foot pressure correction setting screen".
❾
❽
.
❾ after the completion of thread trimming, the screen returns to the "Auto-
– 98 –
5)
The set value of presser foot pressure
can be increased / de-
creased with
Presser foot pressure set in this
*
step of procedure is used for setting a
correction chart.
This presser foot pressure is not reflect-
ed to the presser foot presser that can
be set as sewing pattern data.
to . The value can be in-
.
❽ .