JUKI LH-4500C Series Instruction Manual page 131

<Multi-layered portion (top) setting list screen>
Run-on to the multi- The sewing machine reaction to
layered portion the detection of the completion
completes of run-on to the multi-layered
portion of material delays by
several stitches.
When the sewing machine completely runs on the multi-layered portion of material, the
multi-layered portion detection device detects it and the sewing parameter automatically
returns to that for the top of multi-layered portion of material. When the sewing machine
steps off the multi-layered portion of material, the multi-layered portion detection device
detects it and the sewing parameter automatically returns to that for the flat portion of
material. In both cases, the sewing machine reaction may delay according to the sewing
conditions.
The aforementioned delay can be prevented by setting the number of stitches for chang-
ing over the multi-layered portion of material.
3)
❹
❸
* When the number of stitches for
4)
End of the multi-
layered portion of
material
– 126 –
Similarly, set the number of stitch-
es to be sewn before carrying out
changeover by pressing
"Multi-layered portion (top) setting list
screen".
Factory-set value at the time of delivery : 0
(Number of stitches is not set)
Setting range : 0 to 200
changeover" is set to 0 (zero), the
changeover function according to the
number of stitches is turned OFF.
❹ , the values
When you press
you have entered are confirmed and
the screen returns to the "Multi-layered
portion sewing parameter list screen".
The sewing machine
reaction to the detection
of the end of multi-layered
portion of material delays
by several stitches.
❸ on the