JUKI LH-4500C Series Instruction Manual page 143

<Step changeover reference selection screen>
<Polygonal shape stitching step edit screen>

<Sewing data edit screen>
 


– 138 –
When displayed step  is pressed, the
9)
"step changeover reference selection
screen" is displayed.
Select the step changeover reference
in the same manner as aforementioned
item number 3.
 is pressed, the oper-
10) When
ation is confirmed. Then, the screen
returns to the "polygonal shape stitch-
ing step edit screen".
11) When step  is pressed again, the
"sewing data edit screen" is displayed.
Select the step changeover reference
in the same manner as aforementioned
item number 3.
12) Set other sewing data  in the same
manner as item number 5.
 is pressed, a step con-
13) When
taining 100 stitches is inserted immedi-
ately before the selected step.
When the inserted step field button is
pressed, the "sewing data edit screen"
is displayed.
In the same manner as described
above, select the step changeover ref-
erence and set the sewing data.
* In the case the maximum number of
steps have already been registered
 is not displayed.