JUKI LH-4500C Series Instruction Manual page 150

❹
<Registered cycle pattern selection screen
(In numerical order)>
<Cycle sewing pattern edit screen>
❽ ❾
<Cycle sewing pattern number registration screen>
❺
❼ ❻

– 145 –
Press Pattern No. ❹ you want to cre-
3)
ate.
❺ is pressed, the opera-
4) When
tion is confirmed. Then, the screen re-
turns to the "new cycle sewing pattern
edit screen".
5) The selected pattern is added to cycle
sewing data with
Create the cycle sewing data by repeat-
ing steps 2) to 5).
❻ to display the data dis-
6) Press
card confirmation screen.
❼ is pressed, the "cycle
7) When
sewing pattern number registration
screen" is displayed.
8) Enter the sewing pattern number to be
registered using numeric keypad ❽ .
An unassigned registration number
that is closest to the entered value in
the plus/minus direction is displayed by
pressing
9) The created pattern is registered by
 .
pressing
Then, the current screen returns to the
"sewing pattern number list screen".
In the case the entered number has
already been registered, the prompt
message for overwrite confirmation is
displayed.
suffixed.
❾ .