Table of Contents
Advertisement
Maintenance
The following operations must be carried out regularly.
1. Using a damp lint-free cloth, remove any dust that may have gathered on the control panel enclosure.
Attention:
Do not use any kind of cleaning product or solvent!
2. Push the TEST button to check the proper operating capability of the LEDs and buzzer.
3. Check the battery efficiency and change them if necessary.
4. Check the integrity of all wires and connections.
5. Ensure that there are no insects inside the control panel.
6. Carry out maintenance on the smoke detectors (clean the outside and the detection chamber).
Note:
Points 1 and 2 can be carried out by authorized persons, whereas all other points must be carried out by
qualified technicians.
42
Installation manual
Chapter 9
Maintenance
- Quick Links:
- Maintenance
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartLoop Series and is the answer not in the manual?