Removing The Chassis Cover - DFI KS-SD Series User Manual

Removing the Chassis Cover

Please follow these guidelines before performing any installation procedures:
1. Make sure the system and all other peripherals connected to it have been powered off.
2. Disconnect all power cords and cables.
3. The 6 mounting screws on the left and right sides and bottom of the system are used to
secure the cover to the chassis. Remove these screws and put them in a safe place for
later use.
Mounting Screw
User's Manual | KS-SD
4. Lift the cover upward to open the system.
5. The SODIMM sockets, Mini PCIe slot and SATA drive bay are accessible after removing
the chassis cover.
Mini PCIe slot
Chapter 3
SODIMM
SATA drive bay
12