The 8 screws of the system are used to secure the cover to the chassis. Remove the screws and put them in a safe place for later use. Step 2: Lift the cover to open the system. Quick Installation Guide | KS101-EHL...
Installing an M.2 Card M.2 B Key (Option) mini-PCIe M.2 E Key COM 1 2230 COM 2 USB 6-7 USB 4-5 M.2 E-Key Quick Installation Guide | KS101-EHL...
Page 5
Screw tight the card onto the stand-off with a screw driver and a stand-off screw until the gap between the card and the stand-off closes up. The card should be lying parallel to the board when it’s correctly mounted. Quick Installation Guide | KS101-EHL...
Cable Antenna Connector Washer DFI reserves the right to change the specifications at any time prior to the product's release. This QR may be based on the product’s revision. For more documentation and drivers, please visit the download page at www.dfi.com/...