Chapter 3 - Installing Devices; Removing The Chassis Cover - DFI TPC150-SD User Manual

Chapter 3 - Installing Devices

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it have
been powered-off.
2. Disconnect all power cords and cables.
3. The 6 mounting screws on the bottom of the system are used to secure the
cover to the chassis. Remove these screws and put them in a safe place for
later use.
Chapter 3 Installing Devices
Chapter 3
4.
5.
Mounting screw
11
Lift the cover up to open the system.
The Mini PCIe and the SODIMM sockets are readily accessible after removing the
chassis cover.
Mini PCIe socket
SODIMM socket
www.dfi.com