Getting To Know The Ks-Sd - DFI KS-SD Series User Manual

Getting to Know the KS-SD

Bottom View
Status LED (Orange)
HDD LED (Red)
(1)
Power Button
(Green LED)
Remote Power-on
Switch
Reset Button
Power button with LED (Green)
Press to power on or power off the system.
Reset button
Press to reset the system.
HDD LED (Red)
Indicates the status of storage devices (including the mSATA card) as below.
Disk access
HDD State
activity
Blink
LED Behavior
Status LED (Orange)
Indicates system status as below.
Status LED
ACPI States Powered-On
LED Behavior Always ON
Remote power-on/power-off switch connector
Connects a distant power on/off switch.
COM Ports
All COM ports can be selected among RS232, RS422 and RS485 via jumper settings.
In addition, COM1 and COM2 can be selected between standard RS232 and RS232 with
power via jumper settings.
User's Manual | KS-SD
COM 2 COM 1
COM 3
COM 4
HDD LED
Disk drives present or not present
Off
Hibernate/
Standby/Sleep
Soft off
Blinks Off
Chapter 1
Top View
DC-in
VGA
DC-in
DC 9~36V power input via a terminal block connector.
DVI-D (DV-I connector)
Connects the DVI-D connector of an LCD monitor.
HDMI (or DP, optional)
Connects the HDMI connector of an LCD monitor.
USB 3.0 Ports
Connect USB 3.0 devices as well as devices based on previous USB versions.
Gigabit LAN Ports
Connect the system to a local area network.
VGA Connector
Connects the VGA connector of a monitor.
LAN 1 LAN 2
DVI-D
(DVI-I connector)
USB 3.0
HDMI (optional)
Chapter 1
8