Removing The Chassis Cover - DFI KS070-AL User Manual

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it have been powered off.
2. Disconnect all power cords and cables.
3. The 12 mounting screws on the top and bottom as well as both sides of the system are used
to secure the cover to the chassis. Remove these screws and put them in a safe place for
later use.
Mounting screw
4. Lift the cover up to open the system.
Lift the cover upward
Chapter 3 Installing Devices
Chapter 3
Mounting screw
Mounting screw
5. The Mini PCIe and the M.2 sockets are readily accessible after removing the chassis cover.
M.2 socket
12
Mini PCIe socket
www.dfi.com