Removing The Chassis Cover - DFI KS070-AL Installation Manual

Removing the Chassis Cover

Installing internal components requires you to remove the chassis. Please
use the following procedure to open the chassis cover.
1. Make sure the system and all other peripheral devices connected to it
have been powered-off.
2. Disconnect all power cords and cables.
3. The 4 mounting screws on the rear side of the system are used to se-
cure the cover to the chassis. Remove these screws and put them in a
safe place for later use.
Mounting Screw
4. Lift the cover to open the system.
5. The Mini PCIe and the SODIMM slots are readily accessible after remov-
ing the chassis cover.
Mounting Screw
6
Mini PCIe
Sockets
SODIMM
Socket