Installing A 2.5" Sata Drive - DFI KS-SD Series User Manual

Installing a 2.5" SATA Drive

1. Before installing the SATA drive, connect the SATA data and power cable to the SATA data
connector of the SATA drive. Then install the SATA drive on the HDD bracket with the
provided mounting screws from the HDD drive bay kit.
Mounting Screws
2. Place the SATA drive installed with the HDD bracket in the system. Align the mounting
holes on the HDD bracket with the mounting holes on the drive bay and use the provided
mounting screws to secure the drive in place.
Mounting Screws
Mounting hole
User's Manual | KS-SD
Mounting screw
SATA data and power cable
3. Connect the other end of the SATA data and power cable to the SATA data and power
connectors on the system board respectively.
SATA data connector
SATA power connector
Chapter 3
14