DFI KS-SD Series User Manual page 35

Video Configuration
This section configures the video settings. Note that the options may vary according to the
"Boot type" selected in the "Boot" menu.
Primary Display
Select the primary display for the system. Note that this option will be shown only
if the "Boot type" is set to "Dual" or "UEFI". The options are Auto or IGFX (internal
graphics). The order of video device initialization will be as follows:
Auto mode: PEG (PCIe Graphics devices connected to PEG lanes directly routed from
the CPU )->PCIe graphics devices->PCI graphics devices->IGFX (internal graphics)
IGFX: IGFX (internal graphics)->PEG (PCIe Graphics devices connected to PEG lanes
directly routed from the CPU)->PCIe graphics devices->PCI graphics devices
PEG: PEG (PCIe Graphics devices connected to PEG lanes directly routed from the CPU)
->PCIe graphics devices->PCI graphics devices->IGFX (internal graphics)
PCI: PCI graphics devices->PCIe graphics devices->PEG (PCIe Graphics devices con-
nected to PEG lanes directly routed from the CPU )->IGFX (internal graphics)
User's Manual | KS-SD
Internal Graphics
Enable, disable or to automatically detect internal graphics.
Boot display
Set the display device combination during system booting. Note that this option only
appears when the boot type is dual or legacy boot type.
Chapter 7
35