Exit - DFI KS-SD Series User Manual

Exit

This section configures the parameters for exiting the BIOS menu.
Exit Saving Changes
Select this field and then press <Enter> to exit the BIOS setup and save your changes.
Load Optimal Defaults
Select this field and then press <Enter> to load optimal defaults.
Discard Changes
Select this field and then press <Enter> to exit the BIOS setup without saving your
changes.
Save Setting to file
Select this option to save BIOS configuration settings to a USB drive. The operation will
fail if there aren't any USB devices detected on the system. The saved configuration
will have the DSF file extension and can be used for restoration.
Restore Setting from file
Select this option to restore BIOS configuration settings from a USB drive. Note that
this option will not be available if there aren't any USB devices detected in the system.
User's Manual | KS-SD
Chapter 7
45