Removing The Chassis Cover - DFI TPC150-SD Installation Manuals

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it
have been powered-off.
2. Disconnect all power cords and cables.
3. The 6 mounting screws on the bottom of the system are used to secure
the cover to the chassis. Remove these screws and put them in a safe
place for later use.
4. Lift the cover up to open the system.
5. The Mini PCIe and the SODIMM sockets are readily accessible after
removing the chassis cover.
3
Mounting screw
Mini PCIe socket
SODIMM socket