Lam bda 465 Advanced Transm ission Holder
This instruction sheet describes the installation of this accessory which is used with the Lambda 465
Spectrophotometer.
Read these instructions before you install this accessory.
NOTE:
Contacting P erk inElm er
Supplies, replacement parts, and accessories can be ordered directly from PerkinElmer, using the part
numbers.
See our website:
http://perkinelmer.com
PerkinElmer's catalog service offers a full selection of high-quality supplies.
To place an order for supplies and many replacement parts, request a free catalog, or ask for information:
If you are located within the U.S., call toll free 1-800-762-4000, 8 a.m. to 8 p.m. EST. Your order will be
shipped promptly, usually within 24 hours.
If you are located outside of the U.S., call your local PerkinElmer sales or service office.
Features
Use for measuring the transmittance of various features of film, glass, and plate, etc.
•
User-convenient sampling
•
Adjustable fixing arms for the samples with various thickness
•
Height controller to meet sample features
•
Internal magnet for fixing sample
•
Figure 1 Lambda 465 Advanced Transmission Holder [P/N: N4104005]
I nstallation I nstructions
09931298C
PerkinElmer, 710 Bridgeport Avenue,
Shelton, CT 06484-4794, U.S.A
Produced in the USA.