PerkinElmer Lambda 365 Installation Instructions Manual page 14

CAUTION
ATTENTION
NOTE: Start the System Self Test after warming up the system for at least 20 minutes.
4. Double-click on the UV Express Software folder and select one of the mode for starting.
5. The following message box will be shown. Empty the cell holder and close the lid firmly. Click OK.
Figure 27. Closing the lid
6. System Self Test stars. Click OK after finishing the System Self Test.
7. Place the No. 1 and reference cells for each position. Close the lid.
Do not start the UV Express software before finishing the initialization of grating.
Ne dém arrez pas le logiciel UV Express avant de terminer l'initialisation du
réseau.
14
09931465A