PerkinElmer Lambda 365 Installation Instructions Manual page 16

2. Select the Calibration tab in the Multicell window. The following dialog box will appear.
3. The functions of the Multicell Calibration are shown as follows.
Command
MultiCell Position
Multicell Move
Multicell Calibration
Stop
Save Result
Reset Multicell
4. Click on Reset Multicell
Function
Show saved steps about each cell position of the Multi-Cell.
Used for moving Multi-Cell position as clicking buttons
Used for moving Multi-Cell position using
entered step.
Used to perform the Multi-Cell calibration.
Used to stop the Multi-Cell calibration.
Used to save the calibrated result.
Used to move to '0' step of Multi-Cell position.
to format the Multi-Cell steps. Click OK.
16
.
buttons by
09931465A