Table of Contents
Advertisement
Contents and general instructions
Intended use
Target group
Service
Festo P.BE-CPV-EN en 0005e
The CPV valve terminals described in this documentation are
intended exclusively for controlling pneumatic actuators.
They may only be used in conjunction with devices and com-
ponents recommended or permitted by Festo as follows:
–
as intended
–
in original condition
–
without any modifications
–
in faultless technical condition
The maximum specified values for pressures, temperatures,
electrical data, torques, etc. must be observed.
Please comply with national and local safety laws and regula-
tions.
Warrning
If used as an explosion-protected operating media, do not
disconnect when under tension!
This manual is directed exclusively at personnel trained in
control and automation technology, who have experience in
installing, commissioning, programming and diagnosing pro-
grammable logic controllers (PLC) and field bus systems.
If you have any technical problems, please contact your local
Festo Service.
V
Hide quick links:
Advertisement
Table of Contents
