Fitting Onto A Hat Rail - Festo CPV-VI Series Manual

2. Fitting
Valve terminal Type of fitting from the rear
Diameter of
fastening holes
CPV10/14 4.5 mm
CPV18 5.5 mm

2.1.2 Fitting onto a hat rail

Festo P.BE-CPV-EN en 0005e
Drill 4 fastening holes with 5.5 mm diameter or threaded
holes for M5 screws in the fastening surface.
Threaded holes
for:
M4 screw
M5 screw
S
Then fasten the CPV valve terminal with four M4 or M5
screws of sufficient length to the wall.
For fitting the CPV valve terminal onto a hat rail, you will re-
quire the following fitting kits:
– CPV10/14 valve terminal:
Fitting kit CPV10/14-VI-BG-NRH-35-
– CPV18 valve terminal:
Fitting kit CPV18-VI-BG-NRH-35
Both fitting kits consist of 2 brackets, 2 or 4 self-boring
M4x10 screws (CPV10/14) or M5x10 (CPV18) and 2 M4x10
screws with clamping elements and springs.
Type of fitting from the front
Diameter of Threaded holes
fastening holes for:
5.5 mm M5 screw
– –
2-9