3. Installation
3.3
Connecting the CPV valve terminal
Festo P.BE-CPV-EN en 0005e
Connecting
Removing
Fig. 3/1: Tubing variants
In order to guarantee the optimum efficiency of your
CPV valve terminal, we recommend in the following cases that
you connect the compressed air tubing and, if necessary, also
the exhaust air tubing on both sides (appropriate end plate
pairs see Appendix B "Converting the end plates"):
–
when large volume cylinders are operated at high speeds
–
when several valves are switched simultaneously to the
flow position
Please note
S CPV valve terminal with two pressure zones Connect the
supply pressures to both sides of the end plates or the
pneumatic multipin.
1
2
3
3-5